Global-Spec Wall-Mounted Infrared Heaters: Built to Fit Any Power Grid, Any Plug
We make wall-mounted electric infrared heaters for factories, workshops, and process areas—places where you need heat right where you stand, not wasted on the whole room. The idea is simple: direct, focused warmth that hits the target and stays there. And if you need a unit that ships anywhere, we set it up to match the local voltage and plug.
The power side—kept real, kept simple
On the plant floor, electricity is what it is. So our wall-mounted infrared heaters are built to work with it, not fight it. You can order units across a wide range: 110V, 220V, 230V, 240V, and 380V–400V. When the voltage matches your facility, the current stays manageable, voltage drop across long runs eases up, and your wiring stays practical. Wattage is chosen based on what you need: the heat intensity for the space, and how much temperature rise you want. With a wall-mounted profile, we can scale output for a tight spot or a larger zone. The footprint stays compact, and the mounting hardware is built to handle thermal expansion and the load once the tube hits operating temperature. Here’s the trade-off you should know: higher power density means faster warm-up and stronger line-of-sight heating. But it also means you need thoughtful thermal management around the heater and inside the control panel.
What’s inside: built to stay steady under stress
Infrared heating only works if the emitter is steady. That’s why we use quartz tubes—they handle rapid heating and cooling cycles and keep output consistent. Inside, the filament layout spreads radiant heat evenly along the length, so you don’t get hot spots and cold ends. On the back, a reflective coating pushes more energy forward. That improves directional efficiency and keeps waste heat from beating against the wall. The front surface is protected against oil, dust, and humidity, so performance stays solid over time. For connections, we match regional installation practices. Standard end-caps and pin layouts make wiring quick, and the connections are rated for the heater’s operating temperature. That means installation is straightforward, and service is doable even in gritty industrial spaces.
Where it shines—and why it stays out of the way
These heaters are perfect for spot heating at workstations, warming equipment enclosures, and preventing processes from going cold in winter. The wall-mount design saves floor space and puts the heat where you can aim it. We handle global customization for voltage and plug standards, so you can use the same heater family across plants while still meeting local code. The payoff is real: fewer spare-part SKUs to manage, faster commissioning, and less rework in the field. On the shop floor, you get fast warm-up, directional control, and a tough build that can take a beating. Just make sure your wiring, overcurrent protection, and mounting location match the wattage and voltage you choose. If you need a unit that can drop in anywhere—110V to 400V, with the right plug for the region—tell us your power system, and we’ll build the configuration that fits.